收藏本站
Chapter 6 – S-Registers
S-Reg
S29
Unit
10 ms
Range
0–255
Default
70
Description
On Hook Time: Sets the length of time that the modem goes on-hook when it
encounters a flash dial modifier (!) in the dialing string.
S30
10 ms
0, 1–255
0
Disonnect Inactivity Timer: Sets the length of time that the modem waits before
disconnecting when no data is sent or received. A value of zero disables the timer.
Applies to asynchronous operation only.
S36
decimal
0–7
7
LAPM Failure Control: Specifies the fallback action to take in the event of an
LAPM negotiation failure. These fallback options are initiated immediately upon
connection if S48 is set to 128. If an invalid number is entered, S36 acts as if the
default value has been entered. (See S48.)
0 Modem disconnects.
1 Modem stays online and a direct mode connection is established.
3 Modem stays on-line; normal mode connection established.
4 MNP connection is attempted. If it fails, modem disconnects.
5 MNP connection is attempted. If it fails, a direct mode connection is established.
7 An MNP connection is attempted and if it fails, a normal modem connection is
established.
S38
seconds
0–254,
20
Delay Before Forced Hang Up: Sets the delay between the modem’s receipt of
255
the H command to disconnect (or high-to-low transition of DTR if the modem is
programmed to follow the signal) and the disconnect operation. Applies only to
error-correction connections. This register can be used to ensure that data in the
modem buffer is sent before the modem disconnects. If S38 is set between 0 and
254, the modem waits for the remote modem to acknowledge all data in the buffer
before disconnecting. IfS38 is set to 255, the modem does not time out and
continues to attempt to deliver data in the buffer until the connection is lost or the
data is delivered.
S46
decimal
136,
138
Data Compression Control: Enables/disables data compression:
138
136 Error correction without compression.138 Error correction with compression.
S48
decimal
0, 7,
7
V.42 Negotiation Control: Enables or disables LAPM negotiation.
128
An invalid value is treated as a 128 value.
0 Disables negotiation and proceeds with LAPM.
7 Enables negotiation.
128 Disables negotiation. Proceeds at once with the fallback action specified in
S36. Can be used to force MNP.
S86
decimal
0, 3–23
n/a
Call Failure Reason Code: When the modem issues a NO CARRIER result code,
a value is written to this register to help determine the reason for the failed
connection. S86 records the first event that contributes to a NO CARRIER
message. Use the S86? command to read the value.
0 Normal disconnect; no error occurred.
3 Call Waiting caused disconnect.
4 Physical loss of carrier.
5 No error correction at the other end.
6 No response to feature negotiation.
7 This modem is async-only, the other sync-only.
8 No framing technique in common.
9 No protocol in common.
10 Bad response to feature negotiation.
11 No sync information from remote modem.
12 Normal disconnect initiated by remote modem.
13 Remote modem doesn’t respond after 10 retransmissions of the message.
14 Protocol violation.
15 DTR lost.
16 Received GSTN clear down.
17 Inactivity timeout.
18 Speed not supported.
19 Long space disconnect.
20 Key abort disconnect.
21 Clears previous disconnect reason.
22 No connection established.
23 Disconnect after three retrains.
24 Call Waiting tone detected.
25 Extension pickup detected.
26 Remote hang up detected.
Multi-Tech Systems, Inc. AT Commands Reference Guide (S000273F)
44
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
MT5692SMI-IP-92 V.92 SERIAL DATA ONLY
MT5692SMI-V-34 V.34 DATA/FAX SOCKET MODEM
MT5692SMI-X-L-92 V.92 SERIAL DATA
MT9234MU MODEM V.92 DATA/FAX USB WORLD
MT9234ZBA-NAM MODEM V.92 WORLD DATA/FAX
MT9234ZBA-USB-CP MODEM V.92 DATA/FAX USB WORLD
MT9234ZBA-USB MODEM V.92 DATA/FAX WORLD USB
MT9234ZPX-PCIE-CP MODEM V.92 DATA/FAX/VOICE WORLD
相关代理商/技术参数
MT5656ZDX-CP 功能描述:MODEM V.92 DATA/FAX 25 PACK RoHS:是 类别:计算机，办公室 - 元件，配件 >> 调制解调器 系列:MultiModem® ZDX 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34，V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H（145mm x 109mm x 25mm） 供应商设备封装:- 包装:散装
MT5656ZDX-EU 功能描述:MODEM V.92 DATA/FAX EU BUNDLE RoHS:是 类别:计算机，办公室 - 元件，配件 >> 调制解调器 系列:MultiModem® ZDX 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34，V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H（145mm x 109mm x 25mm） 供应商设备封装:- 包装:散装
MT5656ZDX-GB/IE 功能描述:MODEM V.92 DATA/FAX EK BUNDLE RoHS:是 类别:计算机，办公室 - 元件，配件 >> 调制解调器 系列:MultiModem® ZDX 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34，V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H（145mm x 109mm x 25mm） 供应商设备封装:- 包装:散装
MT5656ZDX-NPS-CP 制造商:Multi-Tech Systems 功能描述:V.92 DATA/FAX MODEM (NO POWER SUPPLY) (25 MODEMS) - Bulk
MT5656ZDX-V 功能描述:MODEM V.92 VOICE/DATA/FAX RoHS:是 类别:计算机，办公室 - 元件，配件 >> 调制解调器 系列:MultiModem® ZDX 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34，V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H（145mm x 109mm x 25mm） 供应商设备封装:- 包装:散装
MT5656ZDX-V-CP 制造商:Multi-Tech Systems 功能描述:V.92 VOICE/DATA/FAX MODEM (25 MODEMS) - Bulk
MT5656ZDX-V-EU 功能描述:MODEM V.92 DATA/FAX/VOICE BUNDLE RoHS:是 类别:计算机，办公室 - 元件，配件 >> 调制解调器 系列:MultiModem® ZDX 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34，V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H（145mm x 109mm x 25mm） 供应商设备封装:- 包装:散装
MT5656ZDX-V-GB/IE 功能描述:MODEM V.92 DATA/FAX/VOICE BUNDLE RoHS:是 类别:计算机，办公室 - 元件，配件 >> 调制解调器 系列:MultiModem® ZDX 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34，V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H（145mm x 109mm x 25mm） 供应商设备封装:- 包装:散装